GMP Calble blocks

Rugged, easy to use cable blocks offered in seven configurations for different broadband construction practices.


P/N 70289 Four rollers across 1 in. dia. (red) Weight 3 lbs.	P/N 70287 Four rollers up 1 3/8 in. dia. (black) and four down 1 in. dia. (red) Weight 4.8 lbs.

P/N 70288 Two rollers up 1 3/8 in. dia. (black) and two down 1 in. dia. (red) Weight 4 lbs.	P/N 70290 Four rollers across 1 3/8 in. dia. (black) Weight 3.5 lbs.

P/N 70297 Two rollers up 1 3/8 in. dia. (black) and two down 1 3/8 in. dia. (black) Weight 4.5 lbs.	P/N 70296 Four rollers up 1 3/8 in. dia. (black) and four down 1 3/8 in. dia. (black) Weight 5 lbs.

Pliable, non-marring rollers are forgiving of field abuse and will never crack or scar cable.

Rollers rotate on permanently lubricated bearings.

Cable rollers are provided in two sizes, 1 3/8 in. and 1 in. (35 mm and 25 mm)

Rollers are precisely contoured to carefully support the coax, fiber or innerduct

Spring loaded retaining bar that positively captivates cable within the roller flanges.

The tool can be easily operated single handedly with gloves.

Has no sharp edges or points anywhere.

Two rollers across version can be placed on the strand with GMP's D Cable Block Lifter (P/N 07163) and Extension Handles.

The block hangs on the strand by two hooks with spring loaded pin retention that holds the block on strand and eliminates block "rocking."

Bi-directional locking cam secures the block in position during cable pulling.

Steel inserts in the frame permit the block to slide along the strand for easier positioning. Frame head is made from heat-treated aluminum alloy.

300 lb. (136 kg.f) load capacity rating.

The block design will allow you to install the unit from the ground with the GMP Cable Block Lifter and extension handle sections and lock it onto the strand.